Ceiling cornice for stretch ceiling has long been a classic in interior design. Almost no one chooses wall options because of the large number of requirements (wide gap between the ceiling and the window opening, the walls are certainly not made of drywall), while installing the ceiling cornice does not require anything special.
Features
Ceiling cornices for suspended or suspended ceilings are in many respects different from the options attached to capital ceilings. The first and main difference is the restriction of choice. For stretch ceilings, tire profile models are usually chosen, rarely equipped with a baguette. Other designs are not applicable.
The second difference is the installation features. There are two different methods that you can resort to in order to install a curtain rod for curtains.
The first method of attachment is over the canvas. It is quite simple, but you need to notify the company manufacturing and installing ceilings in advance that you decide to mount the ceiling model.
The second method is more complicated than the first and is suitable for rooms with high ceilings. In this case, a special niche is installed for the cornice behind the ceiling, thereby obtaining the effect of a hidden cornice. The invisible profile can be equipped with spectacular lighting, but even without it, the curtains flowing out of nowhere look quite impressive. The company must be notified of the need to install a hidden cornice, and the design itself must be bought in advance. The size of the niche itself also depends on the width of the cornice.
And that, and another type of eaves can be installed even in the middle of the room. They are great for dividing partitions, for example, filament curtains, used to zoning space.
The ceiling model has several advantages:
- Allows you to hang curtains, if it is not possible to install a wall ledge,
- Withstand a sufficiently large weight depending on the material from which they are made,
- Visually pull the room up, making the ceiling higher.
In cases where it is not possible to install a ceiling cornice for a stretch ceiling, use imitation options. The most common is to install an inconspicuous string cornice on two opposite walls directly under the ceiling.
The installation of each of the options should be taken care of in advance. The best thing that can be done is to delegate the fixing of the cornice of the same company that hung the ceilings. For a relatively small fee, you will receive a number of advantages:
- Save time and nerves. Professionals will install the profile quickly and correctly, and in the future there will be no problems with the operation.
- In case of damage to the ceiling all expenses for repairing and replacing it will be borne by the company. Replacing a stretch ceiling costs a lot more than the money that you save by installing the eaves yourself.
- Professional offices offer wide range of materials for the manufacture of cornices and their color schemes. As a rule, the assortment is not inferior to the store one, except that in the office you may not be able to offer elite wood options.
What are the curtain rods for stretch ceilings?
Cornices can be divided into two large groups:
In this case, the installation is carried out open or closed.
The material for making the cornice can be any.
- Plastic. An affordable price and universal installation, a rich palette of shades and textures provide ample opportunities for interior design. However, for wall-mounted models mounted on brackets, lightweight, lightweight fabrics must be used.
- Aluminum. Painted and laminated models are produced, covered with a thin layer of plastic. They are stronger than plastic cornices and withstand massive three-layer pelmet. Lightweight and durable metal has virtually no load on the floor.
- Tree. The rich texture and noble shades are suitable for classic and national styles. Chic carved models look rich. Wooden cornices easily withstand heavy opaque canvases, as well as lambrequins with massive folds. Hardy and durable option.
- Steel. An ideal and almost the only option when you need to decorate with heavy fabrics the windows above 3 meters. It is steel models that are used for textile decoration of scenes with numerous curtains.
- Forged. An exquisite option for Provence, country, Russian hut. It can easily fit into the classics and country style. The powerful bearing ability allows the use of heavy fabrics with the visual lightness of the cornice.
There are combined models. For example, with an aluminum base and plastic coating.
In addition, regardless of the material and method of attachment, cornices can accommodate from one to 4 sets of curtains. Those. the design provides for the possibility of hanging light tulle, curtains, soft and hard pelmet.
If necessary, you can increase the number of tracks by combining models.
Outdoor installation
With the open method of fastening, the cornice is in sight. It is attached directly to the ceiling film. However, a thin canvas is not able to hold the curtain rod with heavy curtains. The ceiling will just go bad. How to be
- Next, how to call the masters for the installation of the ceiling structure, you need to decide on a specific model of the cornice and purchase it.
- This will allow workers to make the correct marking and install a mortgage beam, to which fasteners will be made.
- After stretching the film using self-tapping screws, the cornice is attached to the embedded element.
Indoor installation
If you want curtains to flow straight from the ceiling, then you need to make a niche in front of the wall. This will visually raise the ceiling. Here you can use both ceiling and wall models.
- So, the stretch ceiling will end at 15-20 cm from the wall. Indentation is necessary so that the curtains do not rub against the ledge of the ceiling structure during movement.
- The width of the niche is calculated by the depth of the folds on the fabric, which will be formed when the curtains are opened. If you like models on grommets, then calculate in advance how much space they will occupy when folded.
- Since the profile is not attached to the wall, you need to build a stop, to which the harpoon will be attached, pulling the film. To do this, a specialized profile or an ordinary wooden beam is attached to the ceiling.
- After mounting the canvas, the cornice is attached. Of course, it is more convenient to install it before the film is stretched. But with hot mounting there is a risk of damaging the plastic.
- In a niche, a cornice of any design from a string to the complex design of Japanese sliding models can be installed. The main thing is that you are comfortable to use.
- Small hooks hold the tulle well and are completely invisible. Rings and clothespins are more convenient for hands.
A cornice
Cornices that belong to this category belong to profile models and are used in baguette and flexible designs. They come in the form of a flat plate with a different number of hook tracks.
Baguette
Available in plastic or aluminum. Their distinctive feature is the presence of a decorative strip covering the hooks. Around the cornice a beautiful peculiar box is formed. Pads are available in different colors and styles. Therefore, you can always choose the appropriate option. Most often used to design rooms in a classic style or Provence.
Flexible
They are a flexible plastic tire with hooks. They can bend as they like, taking any position. Used to create fancy curved trajectories of curtains. Allow to create textile screens.
The trajectory of a curved shape must be calculated in advance and fixed to the ceiling directly to the embedded elements.
The advantage is that with one thread of the cornice you can go around two or more rows at once. The curtain will not only move back and forth. The distant canvas can go forward and back. Those. You will alternate foreground and background.
Great for children's rooms, fitting into the fantasy forms of a multi-level poltolka.
Profile
As a rule, plastic or metal-plastic from 1 mm thick is used for production, from which a complex profile is cast with grooves for hooks. Moreover, the number of rows can be different and allow up to 4 parallel grooves in which the hooks move.
Rotary corner elements allow you to form a curved path of movement of the curtains.
Automatic
If you add a small motor and sensors to the mechanical ledge, you get a self-controlled automatic system that can independently adjust the brightness of the lighting.
By programming the controller, it is easy to get the curtains to open at a certain time in the morning, half cover at lunch, and close tightly in the evening.
In addition to adjusting the lighting, such a system helps to create the effect of presence during the holidays when you are not at home. A remote control using the remote control or SMS transmitter makes it possible to enjoy the openly open windows at the entrance to the house.
Kinds | Price, for 2.5 m | ||||
ceiling | wall | open | closed | ||
Baguette | + | + | + | — | From 1500 |
PVC busbars | + | + | + | + | From 500 (double row) |
Profile | + | + | + | + | From 600 |
Flexible | + | + | + | + | From 1300 |
Inkjet | + | + | + | + | From 60 |
Mechanical | + | + | + | + | From 1400 |
As you can see, a stretch ceiling is not a reason to refuse ceiling eaves at all. And if your ceilings are not so high, give preference to hidden installation and install in a niche any design convenient for you.
What kind of ceiling cornices
The ceiling cornice for suspended ceilings, the photo and descriptions of which can be viewed, is a protruding finishing structure for hanging curtains and decorating the room. A wide selection of these products is offered for sale, which differ:
- Design features.
- The material of manufacture.
- Form.
- The dimensions.
Depending on the design, the following varieties are distinguished:
- Rods - are characterized by a round shape, but are square.
- Strings - made of metal.
- Profiles - have an ergonomic shape and are in special demand.
The installation of the cornice on the suspended ceiling is carried out according to one of 2 installation technologies:
- Mount on top of the canvas. The method is characterized by special simplicity and accessibility.
- Flush mounting. The method involves the arrangement of a special niche behind the ceiling.
In the absence of time or desire to do the work yourself, it is better to entrust it to a professional. For a relatively low fee, you will receive the following benefits:
- Save yourself the waste of time and nerves. A trained specialist will solve the problem in a short time and without errors.
- In case of damage to the ceiling, any costs will be covered by the installation services company.
- A trained professional will be able to offer you different options, choosing the best solution for the interior of your home.
Materials
To understand which cornice is better to use with a stretch ceiling, you should understand the properties of all the materials from which it is made. For the production of most models, plastic is used, since it is characterized by minimal weight, an extensive color gamut and resistance to negative influences in the form of corrosion or decay. However, natural raw materials continue to be in demand, so modern models can be created from the following materials:
Aluminum
On the basis of aluminum, complex openwork forms and decorative elements are made. The advantages of this material include:
- Ease of processing.
- Affordable cost.
- Immunity to moisture.
- A wide range of models.
- The ability to implement any geometric shapes and non-standard options.
Often with aluminum structures, bay windows are finished and complex curtains are arranged.
Steel
Being interested in what kind of cornices are, one should pay attention to steel structures. In most cases, they are shaped like rods, but square items are also available. Depending on the interior features, steel can be finished with colored materials, including:
Another aesthetic appeal of structures is enhanced by chromium plating. The main advantage of steel cornices is high strength. However, they have a large weight, therefore, for error-free installation, it is necessary to provide for a stable mounting base.
Tree
Wood products are considered a "classic of the genre", which never loses popularity. To decorate wooden models, they are tinted, varnished or painted, and also processed by woodcarving.
The disadvantages of wood include high cost and vulnerability to such effects as moisture or fire. Even a wooden cornice is quite heavy, and the process of its installation requires professional help. In order for the product to last for a long time without deformation and damage, it needs to provide an optimal climatic regime.
String
String cornices are suitable for flowing fabrics and are made in the form of a stretched wire with hooks. With the help of the tension regulator you can independently change the position of the tulle and maintain the working condition.
This type of design effectively fits into the interior style of hi-tech, urban, etc.
Which cornice to choose for a stretch ceiling
To understand which cornice to choose for a stretch ceiling, it is important to consider a lot of nuances and criteria. The use of advanced technologies in the production of cornices allows you to implement the most complex and interesting ideas, so a wide selection of offers for every taste is available for sale. To find the right option for your home, you must be guided by the following recommendations:
- The distance between the window opening and the ceiling structure is the decisive criterion for selection. Any canvas takes several cm of free space, so before buying a cornice you need to measure the window-sill wall. In the absence of an optimal distance, it is better to choose a profile cornice.
- If the window openings in the house are large enough and the ceiling is high, the options are expanded. However, a stretch ceiling with a hidden cornice is the best solution for any interior style.
- If the ceiling is already fixed, the wall cornice will be the only option.
- If the key criterion is price, it is recommended to choose hidden models with mechanical control. An external curtain rod is also relatively inexpensive, but the process of its installation requires financial investment.
At the stage of the ceiling search, the style of the room should be taken into account. So, a luxurious baguette made of wood will fit perfectly into the interior of the Baroque or classic style, but will be inappropriate in minimalism. Under the modern interior like hi-tech, modern, etc. choose hidden cornices. Stylish flowing curtains are also popular, demonstrating the compliance of the building with advanced fashion trends.
It is important to pay attention to the size and proportions of the room.Models with rounded edges are indispensable in rooms with a complex layout or limited area. Even with the help of round edges, you can mask unpleasant defects after side trimming and correctly combine the cornice with the plinth.
When choosing a cornice according to the installation method, its relevance and effectiveness should be taken into account. Secret furniture is more in demand in some interiors, and open in the rest. Here you need to take into account the height of the ceilings. If it does not exceed a value of 2.5 m, hidden solutions are not recommended.
When choosing an unusual design, such as a French curtain rod, think about its purpose and accents. The location of the product in a niche will allow you to organize stylish lighting that will emphasize the elegance of the curtains. However, open models demonstrate the high taste of the owners of the house, demonstrating all the advantages of the cornice and ceiling.
The built-in cornice is appropriate in any interior, regardless of the size and other features of the room. It can be used both in residential premises and in office. The main requirement for such types is compliance with the general concept of style.
An important criterion is the texture of the ceiling. Since glossy surfaces have reflective abilities, the presence of a niche cornice will provide a feeling of pouring light. Harmonious distribution of lines gives the design a special elegance and appeal.
If you are going to place a dividing curtain in the room, it is better to use a hidden niche. Mounting an open cornice is inappropriate here, since it will focus on it. To implement such a design, it is better to seek the help of specialists.
Matte ceilings are appropriate in minimalist interiors and are suitable for rooms with good lighting conditions. Some designers allow the combination of 2 types, if this does not impair the interior design.
The key selection criterion remains ceiling safety. In this regard, experts advise to begin the selection before the start of installation work in order to prevent numerous problems and unjustified costs.
Dimensions
Since a wide variety of curtain rods are offered for sale, it will not be difficult to find the optimal size for your premises.
The most popular products are plastic and aluminum, as they have appropriate sizes. The length of an integral single profile is 4 m. If you need a longer element or figured product, it is created from several components. The standard width is 87 mm. The overlapping strip has a thickness of 50-90 mm, and the expanded one under the drawings has a width of 300 mm.
The production of wooden products is carried out on a turn-key basis to order, although ready-made models are also sold on the market. Their length is 200 cm for finished cornices and 400 cm for custom ones.
Mounting method open
Considering an open installation option, the cornice is fixed on the film of the ceiling canvas. But if the structure is heavy enough, a thin film is not able to withstand it and will be deformed. In such a case, the following measures should be taken:
- Before calling a professional installer, you need to determine the type and model of the cornice to be used. Then you need to buy it and deliver it home.
- In this case, specialists will be able to prepare the markup and realize the installation of the embedded beam, which serves as the fixing base.
- Having completed the process of stretching the film, it remains to fix the cornice with screws.
Mounting method closed
If you want to achieve the effect of curtains flowing from the ceiling in front of the wall structure, you need to organize a niche. Such a solution creates a visual expansion of the ceiling and allows the use of ceiling and wall models. Choosing this installation method, you must adhere to the following principles:
- To prevent the curtains from rubbing against the ledge of the ceiling, it is necessary to withstand an indent of 15-20 cm from the wall.
- The width of the niche is determined by the depth of the folds on the fabric surface formed when the curtains are opened. If you like products on grommets, make sure that they will not take up much space.
- Considering the fact that the profile is not fixed to the wall, it is important to foresee the presence of a support in advance. This requires fastening to the ceiling of a specialized profile or wooden beam.
- Having completed the installation of the ceiling canvas, you can proceed to the installation of the ceiling cornice. In terms of convenience, it is better to do this before fixing the film, however, hot fixation increases the risk of damage to brittle material.
- In a niche, you can implement the installation of a ceiling cornice with any shape and configuration. The main requirement is ease of use.
- With the help of small hooks it is convenient to hold the tulle.
Benefits
- Helps visually extend the height of the walls - since it is mounted upwards, the walls look longer than they actually are. There is only one caveat - it is important to choose long curtains, with short the desired effect will not work. An excellent solution for typical apartments and Khrushchev, where the height hardly reaches 2.6 meters.
- Allows you to hang textiles on windows, if you can’t drill the walls. Let's say you made an expensive and fragile wall decoration like Venetian plaster. In this case, it is cheaper to make a holder for curtains at the top.
- It can withstand heavy weight - any fabric, including heavy, is suitable for window textiles.
2. Open way
With this installation method, the window textile holder is attached directly to the ceiling surface. An important point in this case is to make a beam in advance and attach it. And only after pulling the fabric. As you know, you have to make holes in the film to fit the beam, but you can not do without it. If experts deal with the matter, the losses will be minimal - after all, under the chandeliers and lamps, they also make holes in the canvas - everyone is used to it.
After, to the places where the beam is attached, the crossbar itself is attached. It is important that there are no gaps between the beam and the ceiling, otherwise the structure will become leaky and will quickly deteriorate.
What to consider? It is better to choose a thick tree for the beam - so it will withstand the curtain holder construction. Otherwise, it may fall from above - then you will have to redo both the stretch film and the curtain system.
1. In a modern living room
Long curtains in several layers can often be seen in classic interiors, but designers are gradually moving away from stereotypes. For example, in this living room mounted a suspended system with lighting, and chose curtains in a modern style.
Product Specifics
Do not confuse the ceiling cornice under a suspended ceiling with conventional structures designed to be mounted directly to the floor slab. The main difference between these products is a more meager selection of ceiling models. Most often we are talking about tire profiles that are not framed by a baguette. Other types of structures are not used. In addition, the installation procedure for both is also different.
Two different installation technologies are used:
- Over the canvas. The most uncomplicated option. The main thing is to inform the representative of the company manufacturing and installing ceilings about the choice of this method when submitting an order.
- In a special niche. A more complex method, which is mainly used in rooms with high ceilings. In the process, you will need to build a special niche under the cornice behind the main surface. To decorate a hidden profile, beautiful backlighting is often used. In general, a very unusual decorative effect is obtained when the curtains seem to flow out of nowhere. In this case, it is also necessary to notify the company in advance of its decision to use a hidden ledge, which is purchased in advance. The width of the profile directly affects the width of the niche.
Both versions of the eaves can be installed anywhere in the ceiling, even in the middle of the room. They are an excellent option for partition walls used for zoning spaces. Determining which cornice to choose for a stretch ceiling, it is necessary to study the strengths and weaknesses of each option.
Ceiling variety has the following advantages:
- It makes it possible to use curtains in cases where problems arise with the use of wall structures.
- It is able to withstand a significant mass, which gives a wider selection of materials for curtains.
- Contributes to the visual expansion of the space, pulling the room up.
In those situations, it is impossible to establish ceiling structures; instead, they can be used to simulate them. An almost imperceptible string cornice copes with this task: its edges are fixed on opposite walls directly under the ceiling. Choose which cornices are best for suspended ceilings, it is necessary before installation. The easiest way to entrust their installation to the company that was engaged in the arrangement of ceilings.
The advantages of this solution are as follows:
- Save time and effort. Professional installation of ceiling cornices on suspended ceilings will guarantee that no problems will arise during their further operation.
- In case of accidental damage to the tension web, all the costs of repairing and replacing it are the responsibility of the installers. If the work is carried out independently, then you have to shell out from your pocket.
- Specialized firms offer a wide variety of materials for the manufacture of curtain rods and their color design. Most often, this assortment is not inferior to the store (except that the option with expensive wood in this case will be absent).
What are the sizes of ceiling cornices
Thanks to a sufficiently wide size range, it is possible to choose any type of cornice for suspended ceilings, without any connecting seams. The most common plastic and aluminum strips have almost identical parameters. The length of a single profile can reach 4 m. If necessary, special extension adapters are offered, almost invisible to the eye. The width of the product can reach 87 mm, which depends on the number of rows of fixtures.
Recommendations for choosing curtain rods
There are several tips that will help determine the curtain rod for curtains on a stretch ceiling for a particular room:
- The financial issue. It is necessary to focus on your budget, given the fact that installing a hidden model will cost more.
- In what style the room is decorated. Expensive wooden cornices are suitable for a room in the Baroque style or a classic interior. In more modern Minimalism, such an option would look out of place: in this case, it is better to give preference to hidden ledges. Thanks to the unusual effect of curtains flowing out of nowhere, full compliance with the philosophy of modern interiors will be achieved.
- It is important to take into account the size and proportions of the room. The cornice to the suspended ceiling, equipped with a rounded edge, looks good even when it covers the entire length of the room. Thanks to the round edge, an unattractive side trim is well masked and a harmonious connection of the cornice with the plinth is achieved.
- Determining the method of fastening, it is necessary to take into account the height of the ceilings. A niche for concealed installation of the cornice is equipped thanks to the "lowering" of the level of the tension web. In rooms with a standard ceiling height of 250 cm, it is recommended to use a wall cornice for a stretch ceiling.
- If you need to use an unusual design of the cornice (for example, a French cornice), it is important to decide in advance whether attention will be concentrated on it. Using a niche makes it possible to use a backlit model that can emphasize the aesthetic characteristics of curtains. An open cornice allows you to focus on the merits of the design itself. The best option in this case is carved wooden models or polyurethane imitations of stucco molding.
- The built-in types of ceiling cornice for suspended ceilings fit well into any room, regardless of its purpose. They are allowed to be installed both in residential buildings and in offices. In this case, there is no difference whether a secret or open installation will be used. The main thing is that the product blends harmoniously into the surroundings. For example, when using a wide beautiful frieze, it is better to mount the cornice in an open way. In such situations, polyurethane baguettes look very good, decorated in the same color and pattern as the cornice.
- Instead of a plank, the use of decorative tape is allowed. It is fixed on glue over the ledge-protrusion of the plastic cornice. Tapes are available for sale in a wide range of colors and textures, which allows you to choose the most suitable option for any interior.
- A number of manufacturers equip plastic models with special blends. We are talking about an embossed pattern or a simple gilded ornament, applied to a decorative cornice strip. Open rounded cornices with hoods can increase the aesthetics of low rooms, without contributing to their visual understatement. In addition, this finish will not look too defiant.
- If you intend to use a mortgage beam, it is important to remember that more complicated preparation will be needed when using a stand for a conventional cornice, not a hidden one. In the first case, direct contact between the beam and the tension web is required.
- If the curtains on the ceiling ledge with a stretch ceiling will be located in the middle of the room, it is recommended to use a hidden design. As for the fixation of tissue, this is not the point at which you should focus your attention. The presence of a twisted dividing cornice loses in efficiency to a secret niche. It is unlikely that it will be possible to do such work on our own without damaging the stretch film. Therefore, to implement the plan, it is better to call professionals.
- Solving the problem of which cornice to choose for a stretch ceiling, it is necessary to take into account the texture of the ceiling itself. Glossy surfaces better reflect light. When using a cornice in a niche with backlight, the effect of pouring light in the room is created. Due to the overall smoothness and smoothness of the lines, the attractiveness of the tensioning system is achieved.
- An opaque ceiling needs to be applied in those cases when it is necessary to minimize emphasis on its surface. Most often, bright rooms are equipped in this way. Both types of cornices will fit in well here, however, experts recommend using a conventional product with hoods. As a result, the ceiling surface is more beautiful and aesthetic.
Dismantling
To remove the ceiling cornice for a stretch ceiling, just turn the screws. If dismantling is carried out alone, it is better to start unscrewing from the side parts, with a gradual advance to the middle. This will make it possible to avoid structural damage. After all the screws are turned out, you can proceed to removal. You need to act very carefully, avoiding the contact of the sharp edges of the profile with the surface of the film. Otherwise, ugly puffs and even holes may remain on it.
If there is a need to replace the cornice, the new product can only be installed in the same place as the previous one. It is important to get into the same holes that are in the stretch web. In order to simplify the procedure for replacing the cornice, it is recommended to initially mount the trims on special reusable dowels.
Output
The use of hidden cornices on suspended or suspended ceilings provides many advantages. The design installed in a niche makes it possible to shift attention to a complex multi-level system. In this case, it is allowed to refuse to use the backlight, especially if the emphasis is not on the curtains.